Products   Super Hylam (P) Limited Manufactures Switch Board In 2.0 Mm, 2.5, 3.0 Mm & 4.0 Mm Thickness. (Other Thickness May Be Available On Request )  Sheet Size Is 2440x1220 Mm Or 1220x1220 Mm. Finish Available In High Gloss & Matt Finish. Tested All Test Methods Are Carried Out Under Bureau Of Indian Standards. Application Super Hylam Switch  Board Can Be Easily Cut And Drilled To Make It Convenient For Use In Paneling Of Switch Board For Office & Home.   Care And Maintenance Wipe Clean With Ordinary Soap Or Household Ammoniated Liquid Detergent. For Stubborn Stains Use Diluted Organic Solvents Or Stain Remover. High Pressure Decorative Laminated Sheet SO. NO PROPERTIES UNIT SPECIFIED VALUE AS PER IS:2046/95 TYPICAL VALUE 1. THICKNESS    2.0 ± 0.15 2.05     MM  2.5 ± 0.18 2.55        3.0 ± 0.20 3.05 2. RESISTANCE TO IMMERSION IN BOILING WATER         (A) INCREASE IN WEIGHT %  3.75 (MAX.) 2.05   (B) INCREASE IN THICKNESS %  4.0 (MAX.) 2.35   (C) APPEARANCE GRADE NOT WORSE THAN 4 5 3. RESISTANCE TO DRY HEAT 180 Ċ GRADE NOT WORSE THAN 4 5 4. RESISTANCE TO CRAZING GRADE NOT WORSE THAN 4 COMPLIES 5. RESISTANCE TO SURFACE WEAR REV.  350 (MIN) 410 6. RESISTANCE TO STAINING         (A) COFFEE GRADE NOT WORSE THAN 5 COMPLIES   (B) SHOE POLISH GRADE NOT WORSE THAN 5 COMPLIES   (C) CITRIC ACID (10% SOLUTION) GRADE NOT WORSE THAN 5 COMPLIES   (D) ACETONE GRADE NOT WORSE THAN 5 COMPLIES   (E) SODIUM HYDROXIDE (25% SOLUTION) GRADE NOT WORSE THAN 5 COMPLIES   (F) HYDROGEN PEROXIDE (30% SOLUTION) GRADE NOT WORSE THAN 5 COMPLIES 7. DIMENSIONAL STABILITY AT          L %  0.30 (MAX.) 0.20   DEVIATED STABILITY                    T %  0.65 (MAX.) 0.30 8. DIMENSIONAL STABILITY              L %  0.20 (MAX.) 0.10   AT 20 Ċ %  0.30 (MAX.) 0.15 9. FLEXURAL MODULUS MPA 10,000 (MIN.) 12500 10. FLEXURAL STRENGTH MPA      100 (MIN.) 110 11. TENSILE STRENGTH MPA        70 (MIN.)   85 12. RESISTANCE TO CIGARETTE BURN GRADE NOT WORSE THAN 3 COMPLIES 13. RESISTANCE TO STEAM GRADE NOT WORSE THAN 4 COMPLIES 14. RESISTANCE TO MOISTURE GRADE NOT WORSE THAN 4 COMPLIES 15. RESISTANCE TO SCRATCHING N (MIN)) 2.0 (MIN) 3.5 16. RESISTANCE TO COLOUR CHANGE         (A) IN XENON ARC LIGHT GRADE NOT WORSE THAN 6 COMPLIES   (B) IN ENCLOSED CARBON ARC LIGHT GRADE NOT WORSE THAN 5 COMPLIES 17. RESISTANCE TO IMPACT BY LARGE MM. 10 (MM) NO DAMAGE   DIAMETER BALLS (MAX.)       Products 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124             Home | About Us | Products | Contact Us Designed & Developed by Todays & India Net Services